Brompton Wall Mount

Description

Low profile brackets to mount your Brompton on a wall. Using these brackets, your Brompton only protrudes 30cm from the wall, useful for narrow hallways or just efficiently displaying all your Bromptons!

What’s included:

• Two brackets with two mounting pieces each.

Installation Instructions:

1. See the mounting clearance information in the picture gallery.
2. The brackets are designed to be spaced 40 cm apart from each other which should ideally match the stud spacing on your walls. Mounting onto studs would be the most secure method but using suitable drywall anchors would also work.
3. For each bracket, the holes for the screw/wall anchors should be spaced 114 mm apart vertically.
4. The head cap of the screw needs to be 7mm or smaller.
5. The rectangular piece which slots into the bracket should be mounted at the top.
6. Mount the top first and tap the top of the bracket to ensure it is securely in the T channel.
7. Insert the bottom screw and put in the plug to hide the screw.
8. Repeat for the other side!
9. When you place the Brompton on the brackets, you will notice that the pedal sits against the wall, this may mark up your wall over time. You can avoid this by rotating the pedal to a specific spot before hanging it each time and putting a sticker in that location. This is not required and if you are careful when mounting, it will not damage your wall.